QQ客服 官方微博 反馈留言

	Long-stroke fast tool servo and a tool setting method for freeform optics fabrication
	Liu Q. ; Zhou X. Q. ; Liu Z. W. ; Lin C. ; Ma L.
刊名	Optical Engineering
	2014
卷号	53期号:9页码:8
ISSN号	ISBN/0091-3286
英文摘要	Diamond turning assisted by fast tool servo is of high efficiency for the fabrication of freeform optics. This paper describes a long-stroke fast tool servo to obtain a large-amplitude tool motion. It has the advantage of low cost and higher stiffness and natural frequency than other flexure-based long-stroke fast tool servo systems. The fast tool servo is actuated by a voice coil motor and guided by a flexure-hinge structure. Open-loop and close-loop control tests are conducted on the testing platform. While fast tool servo system is an additional motion axis for a diamond turning machine, a tool center adjustment method is described to confirm tool center position in the machine tool coordinate system when the fast tool servo system is fixed on the diamond turning machine. Last, a sinusoidal surface is machined and the results demonstrate that the tool adjustment method is efficient and precise for a flexure-based fast tool servo system, and the fast tool servo system works well on the fabrication of freeform optics. (C) 2014 Society of Photo-Optical Instrumentation Engineers (SPIE)
收录类别	SCI ; EI
语种	英语
内容类型	期刊论文
源URL	[http://ir.ciomp.ac.cn/handle/181722/44132]
专题	长春光学精密机械与物理研究所_中科院长春光机所知识产出
推荐引用方式 GB/T 7714	Liu Q.,Zhou X. Q.,Liu Z. W.,et al. Long-stroke fast tool servo and a tool setting method for freeform optics fabrication[J]. Optical Engineering,2014,53(9):8.
APA	Liu Q.,Zhou X. Q.,Liu Z. W.,Lin C.,&Ma L..(2014).Long-stroke fast tool servo and a tool setting method for freeform optics fabrication.Optical Engineering,53(9),8.
MLA	Liu Q.,et al."Long-stroke fast tool servo and a tool setting method for freeform optics fabrication".Optical Engineering 53.9(2014):8.

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。