充气天线制作及测试方法研究 | |
赵忻; 关富玲; 王宏建; 徐彦 | |
刊名 | 空间科学学报 |
2011 | |
卷号 | 31期号:3页码:384-389 |
关键词 | 充气可展开天线 天线调节 形面精度 |
ISSN号 | 0254-6124 |
其他题名 | Construction and Measurement Method Research of an Inflatable Antenna |
通讯作者 | followbird@126.com |
中文摘要 | 分析设计了一个充气可展开天线,得到初始曲面和裁剪片样式.制作了高精度的裁剪、拼接模板,并用于研制3.2 m口径天线样机.通过加工的天线调节装置,将反射器与支撑结构组装在一起.对索张力的两种调节方法进行了比较分析,最终采用张力弹簧调节装置.利用照相测量系统对反射面进行反复调节,使天线达到了较高的形面精度. |
英文摘要 | An inflatable antenna is analyzed and designed,initial shape surface and cutting-pattern of inflatable reflector are obtained.High precision cutting module and seaming module are manufactured,which are used to develop the 3.2 m diameter antenna prototype.By a series of manufactured adjustment devices,inflatable antenna is installed to rigid support structure.Two kinds of adjust methods for cable tensional force arc compared and analyzed,and finally spring adjust device is adopted.Non-contact photogrammetry measurement system is used to measure the inflatable reflector with repeated adjustment.A measurement method featured by departing target with 5 parts for the large diameter inflatable antenna is found after repeated contrast.Finally a high shape precision of antenna reflector is achieved.The measurement results are analyzed to identify the deviation and an improved method is proposed.These efforts can be referred for design and experiment on high-precision inflatable antenna. |
学科主题 | 微波遥感 |
收录类别 | CSCD |
资助信息 | 国家973计划项目 |
语种 | 中文 |
CSCD记录号 | CSCD:4218438 |
公开日期 | 2014-12-15 |
内容类型 | 期刊论文 |
源URL | [http://ir.nssc.ac.cn/handle/122/3403] |
专题 | 国家空间科学中心_微波遥感部 |
推荐引用方式 GB/T 7714 | 赵忻,关富玲,王宏建,等. 充气天线制作及测试方法研究[J]. 空间科学学报,2011,31(3):384-389. |
APA | 赵忻,关富玲,王宏建,&徐彦.(2011).充气天线制作及测试方法研究.空间科学学报,31(3),384-389. |
MLA | 赵忻,et al."充气天线制作及测试方法研究".空间科学学报 31.3(2011):384-389. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论