Optimum design of the support system of the sic primary mirror with 1m aperture

CORC > 长春光学精密机械与物理研究所 > 中国科学院长春光学精密机械与物理研究所 > 中科院长春光机所知识产出 > 会议论文

	Optimum design of the support system of the sic primary mirror with 1m aperture
	Sun N. ; Zhuo R. ; Cong J.
	2013
会议名称	2012 International Conference on Nanotechnology and Precision Engineering, ICNPE 2012, December 26, 2012 - December 27, 2012
会议日期	December 26, 2012 - December 27, 2012
会议地点	Guilin, China
页码	678-682
英文摘要	The support system of the one-meter SiC primary mirror was optimum designed by the finite element method. For the analysis, the 3D solid finite element model was used by the finite element software. The axial support-ring radius and the lateral support position were determined after the optimum design. The mirror deformations with different pitching angles were calculated. The maximum value of the surface figure deformation root-mean-square (RMS) is 23.84nm, which satisfies the requirement and shows the support system is reasonable and feasible. (2013) Trans Tech Publications, Switzerland.
收录类别	EI
会议录	2012 International Conference on Nanotechnology and Precision Engineering, ICNPE 2012, December 26, 2012 - December 27, 2012
会议录出版者	Trans Tech Publications
会议录出版地	Guilin, China
内容类型	会议论文
源URL	[http://ir.ciomp.ac.cn/handle/181722/41033]
专题	长春光学精密机械与物理研究所_中科院长春光机所知识产出_会议论文
推荐引用方式 GB/T 7714	Sun N.,Zhuo R.,Cong J.. Optimum design of the support system of the sic primary mirror with 1m aperture[C]. 见:2012 International Conference on Nanotechnology and Precision Engineering, ICNPE 2012, December 26, 2012 - December 27, 2012. Guilin, China. December 26, 2012 - December 27, 2012.