Surface hardness and scratch characteristics of nanosecond laser colored Ti-based metallic glass | |
Zhang, Hongyang4; Wu, Haoxiang4; Zhang, Lin3; Jiang, Minqiang1,2; Huang, Hu4; Yan, Jiwang3 | |
刊名 | JOURNAL OF ALLOYS AND COMPOUNDS |
2024-01-05 | |
卷号 | 970页码:7 |
关键词 | Metallic glass Laser coloration Surface morphology Nanoindentation hardness Scratch damage mechanism |
ISSN号 | 0925-8388 |
DOI | 10.1016/j.jallcom.2023.172659 |
通讯作者 | Huang, Hu(huanghu@jlu.edu.cn) |
英文摘要 | Pulsed laser irradiation is widely used for coloring metallic glass (MG) surfaces due to its efficient and clean processing characteristics. However, the hardness and tribological properties of laser colored MG surfaces have rarely been studied. In this study, various colors were prepared on Ti-based MGs by nanosecond pulsed laser irradiation, and the mechanical properties of the colored surfaces were subsequently investigated. Before hardness testing, the colored surfaces were slightly polished and characterized for surface morphology and phase composition. The hardness of the colored surfaces was measured by a nanoindentation instrument, and the corresponding load depth curves and residual indentations were obtained. The results showed a 39% increase in hardness compared to the as-cast surface. Scratch tests were performed to investigate the tribological properties of the colored surfaces. The residual scratches and three dimensional (3D) topographies exhibited diverse features, and the scratch damage mechanism was analyzed accordingly. This study broadened the knowledge of surface hardness and tribological properties, and illustrated the application potentials of laser colored MGs. |
资助项目 | Natural Science Foundation of Jilin Province[20220101198JC] ; National Key Research and Develop-ment Plan Project[2022YFB4600204] ; Graduate Inno-vation Fund of Jilin University[2023CX062] ; Fundamental Research Funds for the Central Universities[2023-JCXK-02] |
WOS研究方向 | Chemistry ; Materials Science ; Metallurgy & Metallurgical Engineering |
语种 | 英语 |
WOS记录号 | WOS:001107027800001 |
资助机构 | Natural Science Foundation of Jilin Province ; National Key Research and Develop-ment Plan Project ; Graduate Inno-vation Fund of Jilin University ; Fundamental Research Funds for the Central Universities |
内容类型 | 期刊论文 |
源URL | [http://dspace.imech.ac.cn/handle/311007/93508] |
专题 | 力学研究所_非线性力学国家重点实验室 |
通讯作者 | Huang, Hu |
作者单位 | 1.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China 2.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China 3.Keio Univ, Fac Sci & Technol, Dept Mech Engn, Yokohama 2238522, Japan 4.Jilin Univ, Sch Mech & Aerosp Engn, Key Lab CNC Equipment Reliabil, Minist Educ, Changchun 130022, Jilin, Peoples R China |
推荐引用方式 GB/T 7714 | Zhang, Hongyang,Wu, Haoxiang,Zhang, Lin,et al. Surface hardness and scratch characteristics of nanosecond laser colored Ti-based metallic glass[J]. JOURNAL OF ALLOYS AND COMPOUNDS,2024,970:7. |
APA | Zhang, Hongyang,Wu, Haoxiang,Zhang, Lin,Jiang, Minqiang,Huang, Hu,&Yan, Jiwang.(2024).Surface hardness and scratch characteristics of nanosecond laser colored Ti-based metallic glass.JOURNAL OF ALLOYS AND COMPOUNDS,970,7. |
MLA | Zhang, Hongyang,et al."Surface hardness and scratch characteristics of nanosecond laser colored Ti-based metallic glass".JOURNAL OF ALLOYS AND COMPOUNDS 970(2024):7. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论