Tribological and mechanical properties of fabricated soft materials with a podium mesostructured | |
Khan Rajib Hossain1,4; Lv Y(吕阳)3; Yao XL(姚昕乐)2; Yang YJ(杨玉洁)4; Jiang P(蒋盼)4; Wang XL(王晓龙)3,4 | |
刊名 | Tribology International |
2023-09 | |
卷号 | 187期号:无页码:108673 |
关键词 | Tribological 3D printing Wear rate CoF FEM Infill pattern Mechanical strength Mesostructured |
DOI | 10.1016/j.triboint.2023.108673 |
英文摘要 | In this paper, the sliding structure morphology, mechanical and tribological behavior of thermoplastic polyurethanes (TPU) under different conditions were studied. The coefficient of friction of TPU stabilizes rapidly at relatively low values and the wear rate increased. High load conditions significantly improved TPU's coefficient of friction and wear rate. However, a high sliding speed was helpful to form a transfer flimsy. Therefore, the coefficient of friction and wear rate of TPU were reduced at higher sliding speeds. The morphology of the wear surface of TPU indicated that the main wear process was viscous wear and wears fatigue under dry and sliding conditions. Using open-source 3D printer is common to use a series of fillers mode and density to reduce time and consumption. Involving the same FDM technique, it is an important to evaluate its strength with this technology. Herein, the effects of more adjustable variables, such as frequencies, infill patterns, density and loads, has been evaluated in detail. |
URL标识 | 查看原文 |
语种 | 英语 |
内容类型 | 期刊论文 |
源URL | [http://ir.licp.cn/handle/362003/30193] |
专题 | 兰州化学物理研究所_固体润滑国家重点实验室 |
通讯作者 | Khan Rajib Hossain; Yao XL(姚昕乐) |
作者单位 | 1.Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, 100039, China 2.School of Chemistry and Chemical Engineering, Key Laboratory of Materials-Oriented Chemical Engineering of Xinjiang Uygur Autonomous Region, Shihezi University, Shihezi, China 3.Shandong Laboratory of Yantai Advanced Materials and Green Manufacturing, Yantai Zhongke Research Institute of Advanced Materials and Green Chemical, Engineering, Yantai 264006, China 4.State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China |
推荐引用方式 GB/T 7714 | Khan Rajib Hossain,Lv Y,Yao XL,et al. Tribological and mechanical properties of fabricated soft materials with a podium mesostructured[J]. Tribology International,2023,187(无):108673. |
APA | Khan Rajib Hossain,Lv Y,Yao XL,Yang YJ,Jiang P,&Wang XL.(2023).Tribological and mechanical properties of fabricated soft materials with a podium mesostructured.Tribology International,187(无),108673. |
MLA | Khan Rajib Hossain,et al."Tribological and mechanical properties of fabricated soft materials with a podium mesostructured".Tribology International 187.无(2023):108673. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论