Fatigue and Fracture Behavior of AlSi10Mg Manufactured by Selective Laser Melting: A Review

doi:10.1134/S102995992304001X

CORC > 力学研究所 > 中国科学院力学研究所 > 非线性力学国家重点实验室

	Fatigue and Fracture Behavior of AlSi10Mg Manufactured by Selective Laser Melting: A Review
	Jiang, Z ; Sun, J ; Berto, F ; Wang, X ; Qian GA(钱桂安)
刊名	PHYSICAL MESOMECHANICS
	2023-08-01
卷号	26 期号:4 页码:367-390
关键词	selective laser melting AlSi10Mg crack initiation post-treatment fatigue life prediction
ISSN号	1029-9599
DOI	10.1134/S102995992304001X
英文摘要	Selective laser melting (SLM) is one of the most promising metal additive manufacturing technologies. SLMed Al-Si alloys have been widely used in the rail transport, aerospace, and automotive industries. Recently, the fatigue and fracture properties of SLMed Al-Si alloys have attracted considerable attention due to their application in critical load-bearing structures. This review aims to better understand the recent progress on the fatigue and fracture investigations of SLMed Al-Si alloys, especially AlSi10Mg, with emphasis on the effect of defects, heterogeneous microstructure, residual stress, and post-treatment methods. In addition, fatigue and fracture modeling methods are discussed. Finally, the challenges and future research opportunities are prospected.
分类号	Q3
WOS研究方向	Mechanics ; Materials Science
语种	英语
WOS记录号	WOS:001044468900001
资助机构	National Natural Science Foundation of China [11932020, 12072345] ; National Science and Technology Major Project [J2019-VI-0012-0126] ; Science Center for Gas Turbine Project [P2022-B-III -008-001]
其他责任者	Wang, X (corresponding author), Beijing Jiaotong Univ, Sch Mech Elect & Control Engn, Beijing 100044, Peoples R China. ; Qian, G (corresponding author), Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China.
内容类型	期刊论文
源URL	[http://dspace.imech.ac.cn/handle/311007/92585]
专题	力学研究所_非线性力学国家重点实验室
作者单位	1.{Jiang, Z., Wang, X.} Beijing Jiaotong Univ, Sch Mech Elect & Control Engn, Beijing 100044, Peoples R China 2.{Sun, J., Qian, G.} Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China 3.{Berto, F.} Norwegian Univ Sci & Technol, Dept Mech & Ind Engn, N-7491 Trondheim, Norway 4.{Berto, F.} Sapienza Univ Rome, Dept Chem Engn Mat Environm, I-00184 Rome, Italy
推荐引用方式 GB/T 7714	Jiang, Z,Sun, J,Berto, F,et al. Fatigue and Fracture Behavior of AlSi10Mg Manufactured by Selective Laser Melting: A Review[J]. PHYSICAL MESOMECHANICS,2023,26(4):367-390.
APA	Jiang, Z,Sun, J,Berto, F,Wang, X,&钱桂安.(2023).Fatigue and Fracture Behavior of AlSi10Mg Manufactured by Selective Laser Melting: A Review.PHYSICAL MESOMECHANICS,26(4),367-390.
MLA	Jiang, Z,et al."Fatigue and Fracture Behavior of AlSi10Mg Manufactured by Selective Laser Melting: A Review".PHYSICAL MESOMECHANICS 26.4(2023):367-390.