Effect of thermal elastohydrodynamic lubrication on vibration characteristics of ball bearing with local defect

doi:10.1177/14644193221095438

CORC > 兰州理工大学 > 兰州理工大学 > 机电工程学院

	Effect of thermal elastohydrodynamic lubrication on vibration characteristics of ball bearing with local defect
	Wang, Yubo 1; Yan, Changfeng 1; Lu, Zunyou 2; Liu, Yaofeng 1; Wu, Lixiao 1
刊名	Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics
	2022
关键词	Ball bearings Defects Dynamic models Elastohydrodynamic lubrication Frequency domain analysis Isotherms Point contacts Bearing dynamics Dynamics models Isothermal elastohydrodynamic lubrication Local defects Lubrication condition Lubrication performance Thermal elastohydrodynamic lubrication Vibration amplitude Vibration characteristics Vibration response
ISSN号	1464-4193
DOI	10.1177/14644193221095438
英文摘要	The vibration response of ball bearing with local defect is closely associated with its lubrication condition. The previous bearing dynamic models were mainly established based on the idealised lubrication conditions, which may not uncover the influence of thermal effect of lubricant on vibration characteristics of defective bearing. This paper presented the influence of thermal effect on elastohydrodynamic lubrication (EHL) performances of ball bearing and the vibration characteristics of defective bearing under thermal EHL. Considering the point contact thermal EHL and the time-varying displacement excitation, a dynamic model of ball bearing with a localised defect on outer raceway was developed. The model was validated by the experimental results. Compared with isothermal EHL, the simulation results with thermal EHL reveal larger pressure and thinner film thickness in the ball-raceway contact interface. Meanwhile, the rotating speed and radial load have significant effects on the thermal EHL performance of ball bearing. The effects of three contact conditions (dry friction, isothermal and thermal EHL) on vibration amplitude of defective bearing in frequency domain are discussed. The results show that the lubricant could improve the vibration of defective bearing, whereas the addition of thermal effect of EHL could increase the vibration amplitude and deteriorate the lubricating performance. The model is beneficial to the bearing model optimisation and the rational selection of lubricants. © IMechE 2022.
语种	英语
出版者	SAGE Publications Ltd
内容类型	期刊论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/159103]
专题	机电工程学院
作者单位	1.School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou, China; 2.Department of Mechanical and Electrical Engineering, Shandong Vocational College of Light Industry, Zibo, China
推荐引用方式 GB/T 7714	Wang, Yubo,Yan, Changfeng,Lu, Zunyou,et al. Effect of thermal elastohydrodynamic lubrication on vibration characteristics of ball bearing with local defect[J]. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics,2022.
APA	Wang, Yubo,Yan, Changfeng,Lu, Zunyou,Liu, Yaofeng,&Wu, Lixiao.(2022).Effect of thermal elastohydrodynamic lubrication on vibration characteristics of ball bearing with local defect.Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics.
MLA	Wang, Yubo,et al."Effect of thermal elastohydrodynamic lubrication on vibration characteristics of ball bearing with local defect".Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics (2022).