A new multiaxial fatigue life prediction model considering additional hardening effect

doi:10.1177/1687814020935331

	A new multiaxial fatigue life prediction model considering additional hardening effect
	Li Bin 1,2; Liu Jianhui 3; Wang Xiuli 2
刊名	ADVANCES IN MECHANICAL ENGINEERING
	2020-06-01
卷号	12 期号:6
关键词	Multiaxial fatigue damage critical plane method Miner rule phase difference additional hardening effect
ISSN号	1687-8132
DOI	10.1177/1687814020935331
英文摘要	The established linear fatigue life prediction model based on the Miner rule has been widely applied to fatigue life prediction under constant amplitude uniaxial and multiaxial loading. Considering the physical significance of crack formation and propagation, a multiaxial equivalent linear fatigue life prediction model is put forward based on Miner rule and critical plane method under constant amplitude loading. The essence of this approach is that the equivalent strain, which consists of the shear strain and normal strain on the critical plane, replaces the relevant parameter of uniaxial nonlinear fatigue damage model. The principal axes of stress/strain rotate under non-proportional loading. Meanwhile, the microstructure of material and slip systems change, which lead to additional hardening effect. The ratio of cyclic yield stress to static yield stress is used to represent the cyclic hardening capacity of material, and the influence of phase difference and loading condition on the non-proportional hardening effect is considered. The multiaxial fatigue life is predicted using equivalent stain approach, maximum shear stain amplitude model, CXH model, and equivalent multiaxial liner model under proportional and/or non-proportional loading. The smooth and notched fatigue specimens of four kinds of materials (Q235B steel, titanium alloy TC4, Haynes 188, and Mod.9Cr-1Mo steel) are used in the multiaxial fatigue experiments to verify the proposed model. The predicted results of these materials are compared with the test results, and the results show that these four models can achieve good effect under proportional loading, but the proposed model performs better than the other three models under non-proportional loading. Meanwhile, it also verifies that the proposed enhancement factor can reflect the influence of phase difference and material properties on additional hardening.
WOS研究方向	Thermodynamics ; Engineering
语种	英语
出版者	SAGE PUBLICATIONS LTD
WOS记录号	WOS:000544717600001
内容类型	期刊论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/155179]
专题	材料科学与工程学院机电工程学院土木工程学院
作者单位	1.Gansu Construct Vocat Tech Coll, Lanzhou, Peoples R China 2.Lanzhou Univ Technol, Sch Civil Engn, Lanzhou, Peoples R China; 3.Lanzhou Univ Technol, Sch Mech & Elect Engn, 287 Langongping Rd, Lanzhou 730050, Gansu, Peoples R China;
推荐引用方式 GB/T 7714	Li Bin,Liu Jianhui,Wang Xiuli. A new multiaxial fatigue life prediction model considering additional hardening effect[J]. ADVANCES IN MECHANICAL ENGINEERING,2020,12(6).
APA	Li Bin,Liu Jianhui,&Wang Xiuli.(2020).A new multiaxial fatigue life prediction model considering additional hardening effect.ADVANCES IN MECHANICAL ENGINEERING,12(6).
MLA	Li Bin,et al."A new multiaxial fatigue life prediction model considering additional hardening effect".ADVANCES IN MECHANICAL ENGINEERING 12.6(2020).