High-speed welding based on consumable DE-GMAW

doi:10.1109/MACE.2010.5536023

	High-speed welding based on consumable DE-GMAW
	Huang, Jiankang 1; Shi, Yu 1; Lu, Lihui 1; Fan, Ding 1; Zhang, Yuming 2
	2010
会议日期	June 26, 2010 - June 28, 2010
会议地点	Wuhan, China
关键词	Electric welding Rapid prototyping Speed Welds Close-loop control DE-GMAW High speed welding Target hardware Welding method Welding process Welding spatter Welding speed
DOI	10.1109/MACE.2010.5536023
页码	5335-5338
英文摘要	A new efficient welding method, Consumable DE-GMAW was proposed. According to the many problems occurred when the welding process is open-loop, such as instability of the welding process and a large welding spatter, etc. A real-time target hardware platform was built for consumable DE-GMAW based on xPC, and a rapid prototyping control system was also developed for consumable DE-GMAW with the Matlab/Simulink. The high-speed welding based on consumable DE-GMAW was realized under close loop control, and good weld shaping was acquired at high welding speed. Then the reasons realized high-speed welding through consumable DE-GMAW was analyzed briefly according to humping weld induced by arc pressure theory. The theory analysis and experiments results show that consumable DE-GMAW provides a new method for high-speed welding. ©2010 IEEE.
会议录	2010 International Conference on Mechanic Automation and Control Engineering, MACE2010
会议录出版者	IEEE Computer Society
语种	中文
内容类型	会议论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/116865]
专题	材料科学与工程学院
作者单位	1.Key Laboratory of Non-ferrous Metal Alloys and Processing, Lanzhou University of Technology, Lanzhou, China; 2.Center for Manufacturing, University of Kentucky, Lexington, KY, United States
推荐引用方式 GB/T 7714	Huang, Jiankang,Shi, Yu,Lu, Lihui,et al. High-speed welding based on consumable DE-GMAW[C]. 见:. Wuhan, China. June 26, 2010 - June 28, 2010.