Microstructures and mechanical properties of electron beam welded CuCrZr/Inconel/316L tube-to-tube junctions for WEST project

doi:10.1016/j.fusengdes.2019.111384

CORC > 兰州理工大学 > 兰州理工大学 > 省部共建有色金属先进加工与再利用国家重点实验室

	Microstructures and mechanical properties of electron beam welded CuCrZr/Inconel/316L tube-to-tube junctions for WEST project
	Zhao, Sixiang 2; Wang, Minjing 2,3; Kou, Shengzhong 2; Li, Qiang 4; Wang, Wanjing 4; Qin, Sigui 1; Lipa, Manfred 5; Firdaouss, Mehdi 5; Luo, G.-N.4
刊名	Fusion Engineering and Design
	2020-02-01
卷号	151
关键词	Electron beam welding Electron beams Fatigue testing Hardness Heat affected zone Hot isostatic pressing Microstructure Tensile strength Tensile testing Ternary alloys Tubes (components) Component manufacturing Macrosegregations Micro segregation Microstructures and mechanical properties Real components Rotary bending fatigue Tensile elongation WEST project
ISSN号	09203796
DOI	10.1016/j.fusengdes.2019.111384
英文摘要	The microstructures and mechanical properties of electron beam welded CuCrZr/Inconel/316 L junctions for WEST project have been investigated. As the welding of ending tubes is performed after the hot isostatic pressing (HIP) for the real components, in this study the CuCrZr tubes were annealed with identical parameters of HIP before welding in order to simulate the real situations of component manufacturing. The junctions were free of defects such as micro-cracks or incomplete penetration. The mechanisms of macro-segregation features, such as beaches, peninsulas, and irregular islands, and of micro-segregation features, such as small spheres, dendrites, Cu-rich particles, and Nb/Mo-rich networks have been discussed. Mechanical testing shows that postweld aging nearly does not improve the tensile strength of the junctions because it just shifts the weakest point of CuCrZr slightly away from the Inconel/CuCrZr weld, but it is beneficial for the tensile elongation of the junctions at 200 °C; meanwhile, postweld aging decreases the hardness of CuCrZr in regions out of the heat affected zone. Cold helium testing performed after rotary fatigue testing indicated that postweld aging does not change the fatigue resistance of the junctions, at least under the current testing conditions. Significant increments in hardness of irregular Inconel-rich islands induced by aging may be attributable to the formation of Nb/Mo-rich networks. This study may be of significance for the manufacturing of ITER divertor components. © 2019 Elsevier B.V.
语种	英语
出版者	Elsevier Ltd
内容类型	期刊论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/115805]
专题	省部共建有色金属先进加工与再利用国家重点实验室材料科学与工程学院
作者单位	1.Advanced Technology & Materials (AT&M) Co., Ltd, Beijing; 100081, China; 2.State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou; 730050, China; 3.School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou; 730050, China; 4.Institute of Plasma Physics, Chinese Academy of Sciences, Hefei; 230031, China; 5.CEA, IRFM, Saint-Paul-Lez-Durance; F-13108, France
推荐引用方式 GB/T 7714	Zhao, Sixiang,Wang, Minjing,Kou, Shengzhong,et al. Microstructures and mechanical properties of electron beam welded CuCrZr/Inconel/316L tube-to-tube junctions for WEST project[J]. Fusion Engineering and Design,2020,151.
APA	Zhao, Sixiang.,Wang, Minjing.,Kou, Shengzhong.,Li, Qiang.,Wang, Wanjing.,...&Luo, G.-N..(2020).Microstructures and mechanical properties of electron beam welded CuCrZr/Inconel/316L tube-to-tube junctions for WEST project.Fusion Engineering and Design,151.
MLA	Zhao, Sixiang,et al."Microstructures and mechanical properties of electron beam welded CuCrZr/Inconel/316L tube-to-tube junctions for WEST project".Fusion Engineering and Design 151(2020).