Effect of surface active agents on nanometer Sb2O3 powder prepared by ball milling

CORC > 兰州理工大学 > 兰州理工大学 > 省部共建有色金属先进加工与再利用国家重点实验室

	Effect of surface active agents on nanometer Sb2O3 powder prepared by ball milling
	Xu, Jianlin 1,2; Zhang, Liang 1,2; Zhou, Shenggang 1,2; Feng, Chong 1,2
刊名	Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
	2014-12-01
卷号	43 期号:12 页码:3003-3007
关键词	Ball milling Crystallinity Dispersions Ethers Milling (machining) Morphology Nanoparticles Particle size Polyethylene oxides Sodium compounds Stearic acid Surface active agents Antimony trioxide Average particle size Ball-milling methods Irregular morphology Narrow distribution Particle agglomerations Polyoxyethylene ether Sodium polyacrylates
ISSN号	1002185X
英文摘要	A ball milling method was used to prepare nanometer antimony trioxide powder, and the effect of surface active agent on the preparation of nanometer Sb2O3 was studied. The phase composition, morphology and the average particle size of experiment samples was characterized by XRD, TEM and FT-IR. Results show that the influence of surface active agent on content of Sb2O3, crystallinity, particle size, morphology and dispersion of products is very significant. When the surface active agent is stearic acid or octylphenol polyoxyethylene ether or sodium polyacrylate, the content of Sb2O3 is lower than 92% with various particle sizes, even accompanying particle agglomeration. When the composites surface active agents of octylphenol polyoxyethylene ether and sodium polyacrylate are used, the content of Sb2O3 of sample is 94% with irregular morphology of particles. With stearic acid and sodium polyacrylate compounded as surface active agent, the resulting nanoparticles, in which the content of Sb2O3 is more than 99%, has the good dispersion, a narrow distribution of particle size (10~20 nm) and small average particle size of 15 nm. Copyright © 2014, Northwest Institute for Nonferrous Metal Research. Published by Elsevier BV. All rights reserved.
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
语种	中文
出版者	Rare Metals Materials and Engineering Press
WOS记录号	WOS:000347497600027
内容类型	期刊论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/112638]
专题	省部共建有色金属先进加工与再利用国家重点实验室材料科学与工程学院
作者单位	1.State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology, Lanzhou ; 730050, China; 2.Wenzhou Research Institute of Pump and Valve Engineering, Lanzhou University of Technology, Wenzhou ; 325105, China
推荐引用方式 GB/T 7714	Xu, Jianlin,Zhang, Liang,Zhou, Shenggang,et al. Effect of surface active agents on nanometer Sb2O3 powder prepared by ball milling[J]. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering,2014,43(12):3003-3007.
APA	Xu, Jianlin,Zhang, Liang,Zhou, Shenggang,&Feng, Chong.(2014).Effect of surface active agents on nanometer Sb2O3 powder prepared by ball milling.Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering,43(12),3003-3007.
MLA	Xu, Jianlin,et al."Effect of surface active agents on nanometer Sb2O3 powder prepared by ball milling".Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering 43.12(2014):3003-3007.