Preferred Film Orientation to Achieve Stable and Efficient Sn-Pb Binary Perovskite Solar Cells

doi:10.1021/acsami.0c19014

CORC > 长春光学精密机械与物理研究所 > 中国科学院长春光学精密机械与物理研究所

	Preferred Film Orientation to Achieve Stable and Efficient Sn-Pb Binary Perovskite Solar Cells
	Y. Sun; S. Yang; Z. Pang; Y. Quan; R. Song; Y. Chen; W. Qi; Y. Gao; F. Wang; X. Zhang
刊名	ACS Applied Materials and Interfaces
	2021
卷号	13 期号:9 页码:10822-10836
ISSN号	19448244
DOI	10.1021/acsami.0c19014
英文摘要	The preferred orientation of crystalline films in hybrid perovskite materials is known to influence the performance of perovskite solar cells (PSCs). Although the preferred growth along the (112) directions has been reported to promote charge transport within the Pb-based polycrystalline perovskite films, the preferred orientation growth of this facet is still difficult to be achieved due to the higher formation energy compared with the (110) plane. Herein, Sn-Pb binary perovskite films with a well-controlled orientation along the (224) plane were achieved by introducing a simple ultrasonic treatment (UST) into the additive engineering fabricated method. UST is used to process the perovskite precursor solutions of tartaric acid (TA) modified Sn-Pb binary polycrystalline perovskite films to regulate the interactions between PbI2/SnI2 and TA in the intermediate phases. Meanwhile, TA-modulated MA0.9Cs0.1Pb0.75Sn0.25I3-based perovskite films with a preferred orientation of (224) crystal plane were obtained by precisely controlling the UST time to 15 min. The highest power conversion efficiency (PCE) of 15.59% with less hysteresis and improved stability was achieved, while realizing 8.64 and 25.32% enhancements of PCE compared with that of TA-based and control counterparts with (110) preferred orientation, respectively. Our work provides a promising route to obtain preferred orientation growth of polycrystalline perovskite films. In particular, we have shown that this approach improves the performance of Sn-Pb binary PSCs, while such methodology is quite flexible and could also be applied to other low-/non-toxic PSCs. 2021 American Chemical Society. All rights reserved.
URL标识	查看原文
内容类型	期刊论文
源URL	[http://ir.ciomp.ac.cn/handle/181722/65549]
专题	中国科学院长春光学精密机械与物理研究所
推荐引用方式 GB/T 7714	Y. Sun,S. Yang,Z. Pang,et al. Preferred Film Orientation to Achieve Stable and Efficient Sn-Pb Binary Perovskite Solar Cells[J]. ACS Applied Materials and Interfaces,2021,13(9):10822-10836.
APA	Y. Sun.,S. Yang.,Z. Pang.,Y. Quan.,R. Song.,...&L. Yang and F. Rosei.(2021).Preferred Film Orientation to Achieve Stable and Efficient Sn-Pb Binary Perovskite Solar Cells.ACS Applied Materials and Interfaces,13(9),10822-10836.
MLA	Y. Sun,et al."Preferred Film Orientation to Achieve Stable and Efficient Sn-Pb Binary Perovskite Solar Cells".ACS Applied Materials and Interfaces 13.9(2021):10822-10836.