Indirect validation method of thermal design for exposed opto-electro-mechanical instrument on satellite

doi:10.3788/OPE.20182607.1741

CORC > 长春光学精密机械与物理研究所 > 中国科学院长春光学精密机械与物理研究所

	Indirect validation method of thermal design for exposed opto-electro-mechanical instrument on satellite
	Liu, Shao-Ran; Liu, Bai-Lin; Luo, Zhi-Tao; Yang, Qing-Bo
刊名	Guangxue Jingmi Gongcheng/Optics and Precision Engineering
	2018
卷号	26 期号:7 页码:1741-1748
关键词	Optical communication Communication satellites Instrument testing Orbits Satellites Test facilities
ISSN号	1004924X
DOI	10.3788/OPE.20182607.1741
英文摘要	Satellite-borne opto-electromechanical instruments preserve both optical systems and mechanism properties; the former has a strict requirement for temperature, and the latter has a complex structure and is constantly moving. This is a challenge to the test validation of the thermal characteristics. A case study of the indirect validation method of the thermal design for the optical communication terminal is presented. The indirect validation method may be utilized to predict the in-orbit temperature through the thermal analytical model, which is corrected using temperature data in the thermal balance test. The thermal balance test and model correction have been made. Very good correlation was demonstrated between the computed results of the proposed model and the measured test data; a deviation of 81% is less than 5. Thus, the model is appropriate for use in validation of thermal design. Comparing the thermal analytical results to the flight results, the deviation of 81% is less than 4. This demonstrates the accuracy and the effectiveness of the indirect validation method, and the method meets the application requirements of optical communication terminals on satellites. The proposed indirect validation method greatly reduces the difficulty of thermal testing and is of certain reference value to altitude-varied and high temperature precision opto-electromechanical instruments. 2018, Science Press. All right reserved.
内容类型	期刊论文
源URL	[http://ir.ciomp.ac.cn/handle/181722/60702]
专题	中国科学院长春光学精密机械与物理研究所
推荐引用方式 GB/T 7714	Liu, Shao-Ran,Liu, Bai-Lin,Luo, Zhi-Tao,et al. Indirect validation method of thermal design for exposed opto-electro-mechanical instrument on satellite[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2018,26(7):1741-1748.
APA	Liu, Shao-Ran,Liu, Bai-Lin,Luo, Zhi-Tao,&Yang, Qing-Bo.(2018).Indirect validation method of thermal design for exposed opto-electro-mechanical instrument on satellite.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,26(7),1741-1748.
MLA	Liu, Shao-Ran,et al."Indirect validation method of thermal design for exposed opto-electro-mechanical instrument on satellite".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 26.7(2018):1741-1748.