Microstructure and stress corrosion cracking of a SA508-309L/308L-316L dissimilar metal weld joint in primary pressurized water reactor environment

doi:10.1016/j.jmst.2019.08.035

CORC > 金属研究所 > 中国科学院金属研究所

	Microstructure and stress corrosion cracking of a SA508-309L/308L-316L dissimilar metal weld joint in primary pressurized water reactor environment
	Dong, Lijin 1,2; Ma, Cheng 1; Peng, Qunjia 1; Han, En-Hou 1; Ke, Wei 1
刊名	JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
	2020-03-01
卷号	40 页码:1-14
关键词	Dissimilar metal weld joint Stress corrosion cracking Microstructure Primary pressurized water reactor environment Slow strain rate tension
ISSN号	1005-0302
DOI	10.1016/j.jmst.2019.08.035
通讯作者	Peng, Qunjia(pengqunjia@yahoo.com)
英文摘要	Stress corrosion cracking (SCC) of an SA508-309 L/308 L-316 L dissimilar metal weld joint in primary pressurized water reactor environment was investigated by the interrupted slow strain rate tension tests following a microstructure characterization. The 308 L weld metal shows a higher content of delta ferrite than the 309 L weld metal. In addition, no obvious Cr-depletion but carbides precipitation at gamma/delta phase boundaries was observed in both 308 L and 309 L weld metals. The slow strain rate tension tests showed that the SCC susceptibility of the base and weld metals of the dissimilar metal weld joint follows the order of SA508 < 308 L weld metal < the heat affected zone of 316 L base metal < 309 L weld metal. The higher SCC susceptibility of 309 L weld metal than that of 308 L weld metal is likely due to the lower content of 8 ferrite. In addition, a preferential SCC initiation in the 309 L weld metal adjacent to 308 L weld metal is attributed to few carbides in this region. (C) 2019 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.
资助项目	National Natural Science Foundation of China[51571204] ; Youth Scientific and Innovation Research Team for Advanced Surface Functional Materials (Southwest Petroleum University)[2018CXTD06] ; Young Scholars Development Found of Southwest Petroleum University[201899010040]
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
语种	英语
出版者	JOURNAL MATER SCI TECHNOL
WOS记录号	WOS:000510493300001
资助机构	National Natural Science Foundation of China ; Youth Scientific and Innovation Research Team for Advanced Surface Functional Materials (Southwest Petroleum University) ; Young Scholars Development Found of Southwest Petroleum University
内容类型	期刊论文
源URL	[http://ir.imr.ac.cn/handle/321006/137101]
专题	金属研究所_中国科学院金属研究所
通讯作者	Peng, Qunjia
作者单位	1.Chinese Acad Sci, Inst Met Res, Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Peoples R China 2.Southwest Petr Univ, Sch Mat & Engn, Chengdu 610500, Peoples R China
推荐引用方式 GB/T 7714	Dong, Lijin,Ma, Cheng,Peng, Qunjia,et al. Microstructure and stress corrosion cracking of a SA508-309L/308L-316L dissimilar metal weld joint in primary pressurized water reactor environment[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2020,40:1-14.
APA	Dong, Lijin,Ma, Cheng,Peng, Qunjia,Han, En-Hou,&Ke, Wei.(2020).Microstructure and stress corrosion cracking of a SA508-309L/308L-316L dissimilar metal weld joint in primary pressurized water reactor environment.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,40,1-14.
MLA	Dong, Lijin,et al."Microstructure and stress corrosion cracking of a SA508-309L/308L-316L dissimilar metal weld joint in primary pressurized water reactor environment".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 40(2020):1-14.