In-situ hot pressing solid-liquid reaction synthesis of dense titanium silicon carbide bulk ceramics

CORC > 金属研究所 > 中国科学院金属研究所

	In-situ hot pressing solid-liquid reaction synthesis of dense titanium silicon carbide bulk ceramics
	Zhou, YC; Sun, ZM; Chen, SQ; Zhang, Y
刊名	MATERIALS RESEARCH INNOVATIONS
	1998-11-01
卷号	2 期号:3 页码:142-146
关键词	Ti3SiC2, synthesis solid-liquid reaction in-situ formation
ISSN号	1432-8917
通讯作者	Zhou, YC()
英文摘要	An in-situ hot pressing/solid-liquid reaction process was developed for the synthesis of dense polycrystalline Ti3SiC2 ceramics using Ti, Si, and graphite powders as starting materials. The present work demonstrated that this process was one of the most effective and simple methods for the preparation of dense bulk Ti3SiC2 materials. Lattice constants of a=3.068 and c=17.645 are calculated for Ti3SiC2 made through this process. The synthesis temperature influenced the phase composition, microstructure and mechanical properties of Ti3SiC2 prepared at different temperatures. And bulk materials with flexural strength of 480 MPa and fracture toughness of 7.88 MPa.m(1/2) were obtained at 1600 degrees C. The high fracture toughness and strength are discussed based on microstructure analysis.
WOS研究方向	Materials Science
语种	英语
出版者	SPRINGER VERLAG
WOS记录号	WOS:000077148100003
内容类型	期刊论文
源URL	[http://ir.imr.ac.cn/handle/321006/108110]
专题	金属研究所_中国科学院金属研究所
通讯作者	Zhou, YC
作者单位	Chinese Acad Sci, Met Res Inst, Ceram & Composite Dept, Shenyang 10015, Peoples R China
推荐引用方式 GB/T 7714	Zhou, YC,Sun, ZM,Chen, SQ,et al. In-situ hot pressing solid-liquid reaction synthesis of dense titanium silicon carbide bulk ceramics[J]. MATERIALS RESEARCH INNOVATIONS,1998,2(3):142-146.
APA	Zhou, YC,Sun, ZM,Chen, SQ,&Zhang, Y.(1998).In-situ hot pressing solid-liquid reaction synthesis of dense titanium silicon carbide bulk ceramics.MATERIALS RESEARCH INNOVATIONS,2(3),142-146.
MLA	Zhou, YC,et al."In-situ hot pressing solid-liquid reaction synthesis of dense titanium silicon carbide bulk ceramics".MATERIALS RESEARCH INNOVATIONS 2.3(1998):142-146.