Strategies for arsenic pollution control from copper pyrometallurgy based on the study of arsenic sources, emission pathways and speciation characterization in copper flash smelting systems | |
Zhou, Huihui1,2; Liu, Guijian1,2; Zhang, Liqun4; Zhou, Chuncai3; Mian, Md Manik1,2; Cheema, Ayesha Imtiyaz1,2 | |
刊名 | ENVIRONMENTAL POLLUTION |
2021-02-01 | |
卷号 | 270页码:12 |
关键词 | Arsenic Flash copper smelting Mass partitioning Occurrence mode Chemical speciation |
ISSN号 | 0269-7491 |
DOI | 10.1016/j.envpol.2020.116203 |
通讯作者 | Liu, Guijian(lgj@ustc.edu.cn) |
英文摘要 | Arsenic in copper flash smelting (FS) systems not only affects the quality of products but also poses significant technological and environmental problems. Based on the assessment of arsenic mass partitioning in the FS system, arsenic elimination in off-gassing and tailings is 22%, and most of the arsenic output (69%) is recycled in the FS system. Circulating arsenic, especially arsenic in recycled dust and slag concentrate, is the key reason for high-arsenic-content feed. Dust-type recycled materials (RMs) contribute much more arsenic to the feed than slag-type RMs. Flash smelting furnace electrostatic precipitator (FSF ESP) dust contributes makese the largest contribution to arsenic among the dust-type RMs of mixed dust, especially trivalent arsenic, followed by FSF and flash converting furnace waste heat boiler (FCF WHB) dust, which contributes pentavalent arsenic. FCF WHB dust exhibits a relatively low arsenic content, consisting mainly of As(V)-O. Slag-type recycled materials contribute As(V)-O to the total feed, and As(III) originates from copper concentrates. Considering the arsenic contribution and environmental risk, reducing the recovery of FSF ESP dust can greatly decrease the arsenic grade of FSF feed and volatile As2O3. As one of the main arsenic sources in feed, FSF slag concentrate should be carefully disposed of if separated from feed materials because of its high arsenic-related environmental risk. In contrast, WHB dust and FCF slag are more suitable as RM due to their high copper content and low arsenic risk. (C) 2020 Elsevier Ltd. All rights reserved. |
资助项目 | major science and technology projects in Anhui province[201903a07020011] |
WOS关键词 | REMOVAL ; FLOTATION ; ELEMENTS ; CU ; ADSORPTION ; SEPARATION ; OXIDATION ; MINERALS ; BEHAVIOR ; SOILS |
WOS研究方向 | Environmental Sciences & Ecology |
语种 | 英语 |
出版者 | ELSEVIER SCI LTD |
WOS记录号 | WOS:000608065400063 |
资助机构 | major science and technology projects in Anhui province |
内容类型 | 期刊论文 |
源URL | [http://ir.ieecas.cn/handle/361006/15858] |
专题 | 地球环境研究所_黄土与第四纪地质国家重点实验室(2010~) |
通讯作者 | Liu, Guijian |
作者单位 | 1.Chinese Acad Sci, Inst Earth Environm, State Key Lab Loess & Quaternary Geol, Xian 710075, Shanxi, Peoples R China 2.Univ Sci & Technol China, Sch Earth & Space Sci, CAS Key Lab Crust Mantle Mat & Environm, Hefei 230026, Peoples R China 3.Hefei Univ Technol, Sch Resources & Environm Engn, Hefei 230009, Peoples R China 4.Anhui Univ, Sch Resource & Environm Engn, Hefei 230601, Peoples R China |
推荐引用方式 GB/T 7714 | Zhou, Huihui,Liu, Guijian,Zhang, Liqun,et al. Strategies for arsenic pollution control from copper pyrometallurgy based on the study of arsenic sources, emission pathways and speciation characterization in copper flash smelting systems[J]. ENVIRONMENTAL POLLUTION,2021,270:12. |
APA | Zhou, Huihui,Liu, Guijian,Zhang, Liqun,Zhou, Chuncai,Mian, Md Manik,&Cheema, Ayesha Imtiyaz.(2021).Strategies for arsenic pollution control from copper pyrometallurgy based on the study of arsenic sources, emission pathways and speciation characterization in copper flash smelting systems.ENVIRONMENTAL POLLUTION,270,12. |
MLA | Zhou, Huihui,et al."Strategies for arsenic pollution control from copper pyrometallurgy based on the study of arsenic sources, emission pathways and speciation characterization in copper flash smelting systems".ENVIRONMENTAL POLLUTION 270(2021):12. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论