The Effect of a Two-Stage Heat-Treatment on the Microstructural and Mechanical Properties of a Maraging Steel | |
Simm, Thomas Hadfield2; Sun, Lin3; Galvin, Deri Rhys4; Hill, Paul5; Rawson, Martin6; Birosca, Soran7; Gilbert, Elliot Paul1; Bhadeshia, Harshad3; Perkins, Karen8 | |
刊名 | Materials (Basel, Switzerland) |
2017-11-23 | |
卷号 | 10期号:12 |
ISSN号 | 1996-1944 |
DOI | 10.3390/ma10121346 |
文献子类 | Article |
英文摘要 | Maraging steels gain many of their beneficial properties from heat treatments which induce the precipitation of intermetallic compounds. We consider here a two-stage heat-treatment, first involving austenitisation, followed by quenching to produce martensite and then an ageing treatment at a lower temperature to precipitation harden the martensite of a maraging steel. It is shown that with a suitable choice of the initial austenitisation temperature, the steel can be heat treated to produce enhanced toughness, strength and creep resistance. A combination of small angle neutron scattering, scanning electron microscopy, electron back-scattered diffraction, and atom probe tomography were used to relate the microstructural changes to mechanical properties. It is shown that such a combination of characterisation methods is necessary to quantify this complex alloy, and relate these microstructural changes to mechanical properties. It is concluded that a higher austenitisation temperature leads to a greater volume fraction of smaller Laves phase precipitates formed during ageing, which increase the strength and creep resistance but reduces toughness. |
语种 | 英语 |
内容类型 | 期刊论文 |
源URL | [http://119.78.100.183/handle/2S10ELR8/266823] |
专题 | 中国科学院上海药物研究所 |
通讯作者 | Simm, Thomas Hadfield; Sun, Lin; Galvin, Deri Rhys; Hill, Paul; Rawson, Martin; Birosca, Soran; Gilbert, Elliot Paul; Bhadeshia, Harshad; Perkins, Karen |
作者单位 | 1.The Australian Nuclear Science and Technology Organisation (ANSTO), Lucas Heights NSW 2234, Australia; 2.College of Engineering, Swansea University, Swansea SA1 8EN, UK. T.H; 3.Department of Materials Science and Metallurgy, University of Cambridge, Cambridge CB3 0FS, UK; 4.College of Engineering, Swansea University, Swansea SA1 8EN, UK; 5.Rolls-Royce plc, P.O. Box 31, Derby DE24 8BJ, UK. Paul; 6.Rolls-Royce plc, P.O. Box 31, Derby DE24 8BJ, UK. Martin; 7.College of Engineering, Swansea University, Swansea SA1 8EN, UK. S; 8.College of Engineering, Swansea University, Swansea SA1 8EN, UK. k.m |
推荐引用方式 GB/T 7714 | Simm, Thomas Hadfield,Sun, Lin,Galvin, Deri Rhys,et al. The Effect of a Two-Stage Heat-Treatment on the Microstructural and Mechanical Properties of a Maraging Steel[J]. Materials (Basel, Switzerland),2017,10(12). |
APA | Simm, Thomas Hadfield.,Sun, Lin.,Galvin, Deri Rhys.,Hill, Paul.,Rawson, Martin.,...&Perkins, Karen.(2017).The Effect of a Two-Stage Heat-Treatment on the Microstructural and Mechanical Properties of a Maraging Steel.Materials (Basel, Switzerland),10(12). |
MLA | Simm, Thomas Hadfield,et al."The Effect of a Two-Stage Heat-Treatment on the Microstructural and Mechanical Properties of a Maraging Steel".Materials (Basel, Switzerland) 10.12(2017). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论