Fabrication of novel thermal barrier coating on polymer composites via the combined sol-gel/sealing treatment process

	Fabrication of novel thermal barrier coating on polymer composites via the combined sol-gel/sealing treatment process
	Huang WZ ; Zou BL ; Zhao Y ; Meng XS ; Wang CJ ; Cao XQ ; Wang Z
刊名	applied surface science
	2012
卷号	258 期号:22 页码:9058-9066
关键词	FUNCTIONALLY GRADED COATINGS SPRAYED OXIDE COATINGS MATRIX COMPOSITES ALUMINUM PHOSPHATE THIN-FILMS ZIRCONIA MICROSTRUCTURE OXIDATION ALLOY
ISSN号	0169-4332
通讯作者	cao xq
中文摘要	thermal barrier coating on the polyimide matrix composites was successfully fabricated at 400 degrees c via the combined sol-gel/sealing treatment process. in this approach, zirconia coating was firstly deposited onto substrate by sol-gel process, followed by penetration of aluminum phosphate into the final coating. sealing mechanisms of phosphate sealant were based on the adhesive binding of phosphates and the chemical bonding. after thermal cycling at 400 degrees c for 135 cycles, no apparent delaminations and spallations appeared in the zro2/phosphates dual coating, and the average bonding strength was 5.83 mpa. thermal oxidation of substrate coated with the zro2/phosphates dual coating could be retarded at about 900 degrees c. crown copyright (c) 2012 published by elsevier b. v. all rights reserved.
收录类别	SCI收录期刊论文
语种	英语
WOS记录号	WOS:000306134900101
公开日期	2013-04-23
内容类型	期刊论文
源URL	[http://ir.ciac.jl.cn/handle/322003/47981]
专题	长春应用化学研究所_长春应用化学研究所知识产出_期刊论文
推荐引用方式 GB/T 7714	Huang WZ,Zou BL,Zhao Y,et al. Fabrication of novel thermal barrier coating on polymer composites via the combined sol-gel/sealing treatment process[J]. applied surface science,2012,258(22):9058-9066.
APA	Huang WZ.,Zou BL.,Zhao Y.,Meng XS.,Wang CJ.,...&Wang Z.(2012).Fabrication of novel thermal barrier coating on polymer composites via the combined sol-gel/sealing treatment process.applied surface science,258(22),9058-9066.
MLA	Huang WZ,et al."Fabrication of novel thermal barrier coating on polymer composites via the combined sol-gel/sealing treatment process".applied surface science 258.22(2012):9058-9066.