2-DIMENSIONAL FINITE-ELEMENT METHOD SIMULATION OF VICKERS INDENTATION OF HARDNESS MEASUREMENTS ON TIN-COATED STEEL | |
H. F. Wang ; X. Yang ; H. Bangert ; P. Torzicky ; L. Wen | |
刊名 | Thin Solid Films
![]() |
1992 | |
卷号 | 214期号:1页码:68-73 |
关键词 | surface |
ISSN号 | 0040-6090 |
中文摘要 | The finite element simulation uses an indenting wedge (apex angle, 136-degrees) as a two-dimensional approximation of the actual Vickers pyramid. The model assumes isotropic properties for the layer and substrate materials and an elastoplastic behaviour with a work-hardening characteristic. The stress distribution and the plastic deformation zone inside the layer as well as across the interface between film and substrate were calculated, Load-dependent Vickers hardness numbers obtained on TiN coatings, 8-mu-m thick on high speed steel, were compared with the finite element prediction for the wedge-shaped indenter. In the experiments results for the composite microhardness, the cross-sectional morphology of the residual impression and information on the quality of the interface adhesion were obtained. By the comparison of calculated and experimental hardness numbers, the yield stress of the TiN layer was found to be approximately 6 GPa. |
原文出处 | |
公开日期 | 2012-04-14 |
内容类型 | 期刊论文 |
源URL | [http://ir.imr.ac.cn/handle/321006/39303] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | H. F. Wang,X. Yang,H. Bangert,et al. 2-DIMENSIONAL FINITE-ELEMENT METHOD SIMULATION OF VICKERS INDENTATION OF HARDNESS MEASUREMENTS ON TIN-COATED STEEL[J]. Thin Solid Films,1992,214(1):68-73. |
APA | H. F. Wang,X. Yang,H. Bangert,P. Torzicky,&L. Wen.(1992).2-DIMENSIONAL FINITE-ELEMENT METHOD SIMULATION OF VICKERS INDENTATION OF HARDNESS MEASUREMENTS ON TIN-COATED STEEL.Thin Solid Films,214(1),68-73. |
MLA | H. F. Wang,et al."2-DIMENSIONAL FINITE-ELEMENT METHOD SIMULATION OF VICKERS INDENTATION OF HARDNESS MEASUREMENTS ON TIN-COATED STEEL".Thin Solid Films 214.1(1992):68-73. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论