Effect of additional elements on mechanical properties of a specially constituted Zr-based alloy | |
M. Iqbal ; W. S. Sun ; H. F. Zhang ; J. I. Akhter ; Z. Q. Hu | |
刊名 | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing |
2007 | |
卷号 | 447期号:1-2页码:167-173 |
关键词 | Zr-based bulk amorphous alloys mechanical properties bulk metallic glasses nanohardness shear angle glass-forming ability microalloying bulk metallic glasses forming ability supercooled liquid amorphous-alloys crystallization microstructure stabilization criterion behavior nb |
ISSN号 | 0921-5093 |
中文摘要 | Bulk metallic glasses (BMGs), especially ZrCuAlNi alloys, are important materials due to their very attractive physical and mechanical properties. However, their applications are restricted due to processing limitations and cost effectiveness. Materials scientists are trying to design and synthesize economical BMGs using inexpensive materials with improved properties. In the present study, six alloys having compositions (Zr0.65Cu0.18Ni0.09Al0.08)(100-x)M-x (where M = Y, Ti, Nb, Er and W and x = 0 and 2 at.%) were synthesized by Cu mould casting using 2-3N pure elements. The base alloy Zr65CU18Ni9Al8 was designed following the Inoue's rules and also adopting the criterion of average valance electrons/atom (e/a ratio = 1.3950) and average atomic size R. = 0.1498 nm. Characterization of alloys was done by XRD, differential scanning calorimetry (DSC) and SEWEDS. Maximum AT, was found to be 129 K for the base alloy. Mechanical properties like Vicker's microhardness, nanohardness, elastic modulus, density, fracture strength and shear angles were measured. Enhancement in ductility was achieved by adding Ti and Nb. Microstructure of as-cast and heat-treated compression tested samples was evaluated. (c) 2006 Elsevier B.V. All rights reserved. |
原文出处 | |
公开日期 | 2012-04-13 |
内容类型 | 期刊论文 |
源URL | [http://ir.imr.ac.cn/handle/321006/33603] |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | M. Iqbal,W. S. Sun,H. F. Zhang,et al. Effect of additional elements on mechanical properties of a specially constituted Zr-based alloy[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2007,447(1-2):167-173. |
APA | M. Iqbal,W. S. Sun,H. F. Zhang,J. I. Akhter,&Z. Q. Hu.(2007).Effect of additional elements on mechanical properties of a specially constituted Zr-based alloy.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,447(1-2),167-173. |
MLA | M. Iqbal,et al."Effect of additional elements on mechanical properties of a specially constituted Zr-based alloy".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 447.1-2(2007):167-173. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论