Performance of the Single-Chamber Solid Oxide Fuel Cell with a La(0.75)Sr(0.25)Cr(0.5)Mn(0.5)O(3-delta)-Based Perovskite Anode

CORC > 金属研究所 > 中国科学院金属研究所

	Performance of the Single-Chamber Solid Oxide Fuel Cell with a La(0.75)Sr(0.25)Cr(0.5)Mn(0.5)O(3-delta)-Based Perovskite Anode
	X. B. Zhu ; Z. Lu ; B. Wei ; Y. H. Zhang ; M. L. Liu ; X. Q. Huang ; W. H. Su
刊名	Journal of the Electrochemical Society
	2010
卷号	157 期号:5 页码:B691-B696
关键词	catalysis catalysts chromium compounds electrochemical electrodes lanthanum compounds nickel oxidation porosity porous materials reduction (chemical) sintering solid oxide fuel cells strontium compounds yttrium compounds zirconium compounds methane sofc electrodes composite oxidation cathode mixture stack
ISSN号	0013-4651
中文摘要	In this paper, perovskite oxide La(0.75)Sr(0.25)Cr(0.5)Mn(0.5)O(3-delta) (LSCM) mixed with a small fraction Ni has been used as the anode of single-chamber solid oxide fuel cell(s) operating in a methane-oxygen mixture. The anode is prepared by an ion impregnation method, whereby a proper mixed solution with metal nitrates and urea is incorporated into the porous presintered yttria-stabilized zirconia (YSZ) anode matrix. After sintering at 1100 degrees C, the impregnated materials change to unique microparticles adhered to the YSZ matrix. These microparticles themselves become porous after reducing in single-chamber conditions, and this porous character is expected to facilitate the anode reaction because it would improve the gas transport. The influence of the environmental temperature and gas composition on the cell performance is also investigated. A maximum power density of 285 mW/cm(2) is achieved at a gas composition of CH(4):O(2)approximate to 2:1 and a furnace temperature of 800 degrees C. The redox cycling test demonstrates that the stability of the LSCM-based anode is better compared to the conventional Ni-YSZ anode.
原文出处	://WOS:000276555300022
公开日期	2012-04-13
内容类型	期刊论文
源URL	[http://ir.imr.ac.cn/handle/321006/31796]
专题	金属研究所_中国科学院金属研究所
推荐引用方式 GB/T 7714	X. B. Zhu,Z. Lu,B. Wei,et al. Performance of the Single-Chamber Solid Oxide Fuel Cell with a La(0.75)Sr(0.25)Cr(0.5)Mn(0.5)O(3-delta)-Based Perovskite Anode[J]. Journal of the Electrochemical Society,2010,157(5):B691-B696.
APA	X. B. Zhu.,Z. Lu.,B. Wei.,Y. H. Zhang.,M. L. Liu.,...&W. H. Su.(2010).Performance of the Single-Chamber Solid Oxide Fuel Cell with a La(0.75)Sr(0.25)Cr(0.5)Mn(0.5)O(3-delta)-Based Perovskite Anode.Journal of the Electrochemical Society,157(5),B691-B696.
MLA	X. B. Zhu,et al."Performance of the Single-Chamber Solid Oxide Fuel Cell with a La(0.75)Sr(0.25)Cr(0.5)Mn(0.5)O(3-delta)-Based Perovskite Anode".Journal of the Electrochemical Society 157.5(2010):B691-B696.