General relationship between strength and hardness | |
P. Zhang ; S. X. Li ; Z. F. Zhang | |
刊名 | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing |
2011 | |
卷号 | 529页码:62-73 |
关键词 | Crystalline materials Bulk metallic glasses Ceramics Strength Hardness Yield criterion Indentation bulk metallic-glass high-pressure torsion mechanical-properties brittle transition 4000 mpa indentation alloys deformation composites evolution |
ISSN号 | 0921-5093 |
中文摘要 | Both hardness and strength are the important properties of materials, and they often obey the three times empirical relationship in work-hardened metals and some bulk metallic glasses (BMGs). But the relationships between strength and hardness are quite different for those coarse-grained (CG) and ultrafine-grained materials, brittle BMGs and ceramics. In the present work, some Cu alloys with different microstructures, Zr-, Co-based BMGs and Al(2)O(3) were employed to analyze the general relationship between hardness and strength. Several different relationships could be gotten from the experimental results of different materials available, and three types of indentation morphologies were observed. Indentation with "sink-in" morphology always represents a state of material and one third of hardness is in the range from yield strength to ultimate tensile strength. The other two indentation morphologies induced the fully hardening of material, so hardness could represent the intrinsic mechanical property of materials. The ratios of hardness to strength are found to be affected by the piled-up behaviors and their ability of shear deformation. Combined effect of the two aspects makes hardness approximately be three times of strength in the work-hardened crystalline materials and the shearable BMGs, but higher than three times of strength in the brittle-, annealed BMGs and ceramics. (C) 2011 Elsevier B.V. All rights reserved. |
原文出处 | |
公开日期 | 2012-04-13 |
内容类型 | 期刊论文 |
源URL | [http://210.72.142.130/handle/321006/30895] |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | P. Zhang,S. X. Li,Z. F. Zhang. General relationship between strength and hardness[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2011,529:62-73. |
APA | P. Zhang,S. X. Li,&Z. F. Zhang.(2011).General relationship between strength and hardness.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,529,62-73. |
MLA | P. Zhang,et al."General relationship between strength and hardness".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 529(2011):62-73. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论