Effects of surface modification of beta-casio3 on electrospun poly(butylene succinate)/beta-casio3 composite fibers | |
Zhang, Daming1,2; Chang, Jiang1 | |
刊名 | Materials chemistry and physics |
2009-12-15 | |
卷号 | 118期号:2-3页码:379-384 |
关键词 | Composite materials Interfaces Microstructure Mechanical properties |
ISSN号 | 0254-0584 |
DOI | 10.1016/j.matchemphys.2009.08.005 |
通讯作者 | Chang, jiang(jchang@mail.sic.ac.cn) |
英文摘要 | In this experiment, pure pbsu fibers, pbsu/12.5% beta-casio3, and pbsu/25% beta-casio3 composite fibers were fabricated by electrospinning. in order to investigate the effects of surface modification of beta-casio3 on composite fibers, beta-casio3 nanowires were surface esterified using dodecyl alcohol. sem micrographs showed that composite materials with modified beta-casio3 have homogeneous fibrous structures similar as that of pure pbsu fibers, while the fibers containing unmodified beta-casio3 were inhomogeneous and much larger in diameter, and also junctions where beta-casio3 agglomerated could be found. mechanical testing showed that with the addition of unmodified beta-casio3 into pbsu matrix, the tensile strength of fibrous materials decreased obviously, and the decrease degree increased with increased beta-casio3 content. however, the tensile stresses of composite materials after surface modification of beta-casio3 turned back and increased about 40% compared to those containing unmodified beta-casio3. all of these results suggested surface modification of beta-casio3 was an effective approach to obtain composite fibrous materials with better morphologies and enhanced mechanical properties, and this method is supposed to be feasible in other fibrous material systems. (c) 2009 elsevier b.v. all rights reserved. |
WOS关键词 | L-LACTIC ACID ; INTERFACIAL INTERACTIONS ; GRAFTING POLYMERIZATION ; MECHANICAL-PROPERTIES ; HYDROXYAPATITE ; SCAFFOLD ; FABRICATION ; SILICA ; BONE ; ESTERIFICATION |
WOS研究方向 | Materials Science |
WOS类目 | Materials Science, Multidisciplinary |
语种 | 英语 |
出版者 | ELSEVIER SCIENCE SA |
WOS记录号 | WOS:000271892800022 |
内容类型 | 期刊论文 |
URI标识 | http://www.corc.org.cn/handle/1471x/2394364 |
专题 | 中国科学院大学 |
通讯作者 | Chang, Jiang |
作者单位 | 1.Chinese Acad Sci, Shanghai Inst Ceram, Biomat & Tissue Engn Res Ctr, Shanghai 200050, Peoples R China 2.Chinese Acad Sci, Grad Sch, Shanghai 200050, Peoples R China |
推荐引用方式 GB/T 7714 | Zhang, Daming,Chang, Jiang. Effects of surface modification of beta-casio3 on electrospun poly(butylene succinate)/beta-casio3 composite fibers[J]. Materials chemistry and physics,2009,118(2-3):379-384. |
APA | Zhang, Daming,&Chang, Jiang.(2009).Effects of surface modification of beta-casio3 on electrospun poly(butylene succinate)/beta-casio3 composite fibers.Materials chemistry and physics,118(2-3),379-384. |
MLA | Zhang, Daming,et al."Effects of surface modification of beta-casio3 on electrospun poly(butylene succinate)/beta-casio3 composite fibers".Materials chemistry and physics 118.2-3(2009):379-384. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论