QQ客服 官方微博 反馈留言

	Microstructure and mechanical behavior of Ni-Cu-Fe-Si porous alloys
	Liu, X. J. ; Liu XJ(刘兴军) ; Huai, Z. ; Lu, Y. ; Wang, C. P. ; Wang CP(王翠萍)
	2012-05-30
关键词	Powder metallurgy Porous Ni-Cu-Fe-Si alloy Space holder materials NaCl Compressive strength
英文摘要	Ni-Cu-based porous alloys have attracted extensive interests for their potential use as filters because of their unique mechanical, corrosion resistant and filtering abilities. In this paper, Ni-Cu-Fe-Si porous alloys with different porosities were prepared by powder metallurgy method using NaCl as space holder materials. The pore features of the Ni-Cu-Fe-Si porous alloys were studied by scanning electronic microscopy (SEM). Mercury injection capillary pressure apparatus was used to determine the porosity of the sintered samples. The crystal structure of constituent phase was identified by X-ray diffraction (XRD). Compression test was carried out to determine the mechanical properties of Ni-Cu-Fe-Si porous alloys. The experimental results indicate that samples sintered at 1100 degrees C for 8 h showed good features of the pores with a moderate porosity (about 50%), the ultimate compressive strength was up to 100 MPa. (C) 2012 Elsevier B.V. All rights reserved.; National Nature Science Foundation of China [51031003]; Ministry of Education of China [707037]; Ministry of Science and Technology of China [2009DFA52170, 2009AA03Z101]; Aviation Science Fund [2009ZF68010]
语种	英语
出版者	ELSEVIER SCIENCE SA
内容类型	期刊论文
源URL	[http://dx.doi.org/10.1016/j.msea.2012.03.008]
专题	材料学院－已发表论文
推荐引用方式 GB/T 7714	Liu, X. J.,Liu XJ,Huai, Z.,et al. Microstructure and mechanical behavior of Ni-Cu-Fe-Si porous alloys[J],2012.
APA	Liu, X. J.,刘兴军,Huai, Z.,Lu, Y.,Wang, C. P.,&王翠萍.(2012).Microstructure and mechanical behavior of Ni-Cu-Fe-Si porous alloys..
MLA	Liu, X. J.,et al."Microstructure and mechanical behavior of Ni-Cu-Fe-Si porous alloys".(2012).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。