等离子喷涂PZT涂层的制备与性能分析 | |
石伟丽 ; 邢志国 ; 王海斗 ; 李国禄 ; 顾林松 ; SHI Wei-li ; XING Zhi-guo ; WANG Hai-dou ; LI Guo-lu ; GU Lin-song | |
2016-03-30 ; 2016-03-30 | |
关键词 | 锆钛酸铅 等离子 涂层 PZT plasma spraying coating TG174.442 |
其他题名 | Preparation and Performance of PZT Coatings Sprayed by Plasma Spraying |
中文摘要 | 用等离子喷涂方法在45号钢基体表面制备了锆钛酸铅(PZT)陶瓷涂层,并用扫描电镜(SEM)、X射线衍射仪(XRD)、透射电镜(TEM)、纳米压痕测量仪和d33准静态测量仪等检测手段对涂层的微观形貌、成分、纳米硬度、弹性模量和压电常数等各项性能进行分析,并测量涂层的介电温谱。结果表明:等离子喷涂制备的PZT陶瓷涂层具有典型的层状结构,结构致密,孔隙率为1.96%;纳米硬度和弹性模量平均值分别为5.881GPa和113.413GPa;压电常数达到了74pC/N,并且由介电常数与温度关系图可推知PZT的居里温度约为370℃。制备的PZT涂层性能良好,使其在实际工况中的使用成为可能。; PZT piezoelectric ceramic coatings were prepared by plasma spraying on 45 steel substrate,then the microstructure morphology,phase composition and mechanical properties of the coatings were analyzed by scanning electron microscope(SEM),X-ray diffraction(XRD),transmission electron microscope(TEM),nano-indentation tester and Belincourt-type quasi-static d33 meter.The results show that PZT ceramic coatings by plasma spraying preparation have a typical lamellar structure,dense structure and low porosity;the surface of the PZT coatings were smooth,and characteristics of porosity is 1.96%.The average nana-hardness and modulus of elasticity were 5.881 GPa and 113.413 GPa,respectively.The piezoelectric constant reaches 74pC/N.Through dielectric constant and temperature diagram,the Curie temperature of PZT can be inferred to be about 370℃.The performance of the PZT coatings is good,so that the good effect can be acquired in actually working condition. |
语种 | 中文 ; 中文 |
内容类型 | 期刊论文 |
源URL | [http://ir.lib.tsinghua.edu.cn/ir/item.do?handle=123456789/144668] ![]() |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 石伟丽,邢志国,王海斗,等. 等离子喷涂PZT涂层的制备与性能分析[J],2016, 2016. |
APA | 石伟丽.,邢志国.,王海斗.,李国禄.,顾林松.,...&GU Lin-song.(2016).等离子喷涂PZT涂层的制备与性能分析.. |
MLA | 石伟丽,et al."等离子喷涂PZT涂层的制备与性能分析".(2016). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论