中心组合设计法在静电吸盘绝缘层结构优化中的应用 | |
李春光 ; 黄利平 ; 田凌 ; 张泽明 ; LI Chun-guang ; HUANG Li-ping ; TIAN Ling ; ZHANG Ze-ming | |
2016-03-30 ; 2016-03-30 | |
关键词 | 静电吸盘 晶圆传热 中心组合设计 自适应进化优化 结构优化 Electrostatic Chuck Heat Transfer Central Composite Design Self-Adaptive Optimization Structural Optimization TN305 |
其他题名 | Application of Central Composite Design in Optimization of Electrostatic Chuck Insulation Structure |
中文摘要 | 为研究等离子体刻蚀中静电吸盘绝缘层结构对晶圆温度分布均匀性影响,建立了晶圆与静电吸盘三维传热模型,采用中心组合设计方法分析了晶圆半径、进气带半径、进气孔半径、槽道深度、粗糙度最大轮廓五个结构变量对均匀性的影响,得到结构变量与均匀性的二次响应面方程。采用自适应进化算法对响应面方程优化,结果表明进气孔半径、槽道深度、粗糙度最大轮廓是最显著影响因素,响应面计算结果与仿真结果一致,该方法可用于静电吸盘的设计研发。; The influence of electrostatic chuck's structure on the temperature distribution uniformity of wafer is discussed. A 3D heat transfer model of wafer and electrostatic chuck is built,and central composite design method and self-adaptive optimization are used to analyze the critical structure variables on the uniformity. The results show that the radius of inlet hole, the depth of groove and the roughness are the most significant factors. Response surface calculation results agree with the simulation results,and the method can be used to the design research and development of electrostatic chuck. |
语种 | 中文 ; 中文 |
内容类型 | 期刊论文 |
源URL | [http://ir.lib.tsinghua.edu.cn/ir/item.do?handle=123456789/144383] |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 李春光,黄利平,田凌,等. 中心组合设计法在静电吸盘绝缘层结构优化中的应用[J],2016, 2016. |
APA | 李春光.,黄利平.,田凌.,张泽明.,LI Chun-guang.,...&ZHANG Ze-ming.(2016).中心组合设计法在静电吸盘绝缘层结构优化中的应用.. |
MLA | 李春光,et al."中心组合设计法在静电吸盘绝缘层结构优化中的应用".(2016). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论