CORC  > 清华大学
聚合物膜上的微尺度金属导线在力电耦合作用下的屈曲行为(英文)
王庆华 ; 岸本哲 ; 谢惠民 ; 李艳杰 ; 吴丹 ; Qing-hua WANG ; Satoshi KISHIMOTO ; Hui-min XIE ; Yan-jie LI ; Dan WU
2016-03-30 ; 2016-03-30
关键词屈曲分层 失稳模态 电载荷 机械载荷 界面韧性 delamination instability modes electrical loading mechanical loading interfacial toughness O631
其他题名Buckling behavior of micro metal wire on polymer membrane under combined effect of electrical loading and mechanical loading
中文摘要研究一种典型的微尺度康铜线/聚合物膜结构在力电耦合作用下的屈曲行为。根据卸载后康铜线从聚合物基底上屈曲的现象,评估康铜线与聚合物基底间的界面韧性。此外,力电耦合作用还会诱发新的失稳模态。在电载荷和拉伸载荷作用下,康铜线易在屈曲时发生断裂。在电载荷和压缩载荷作用下,康铜线易在屈曲区域的顶部发生折叠,偶尔还会向聚合物基底内部方向发生屈曲。分析了这些失稳模态的产生机理。; The buckling behavior of a typical structure consisting of a micro constantan wire and a polymer membrane under coupled electrical-mechanical loading was studied. The phenomenon that the constantan wire delaminates from the polymer membrane was observed after unloading. The interfacial toughness of the constantan wire and the polymer membrane was estimated. Moreover, several new instability modes of the constantan wire could be further triggered based on the buckle-driven delamination. After electrical loading and tensile loading, the constantan wire was likely to fracture based on buckling. After electrical loading and compressive loading, the constantan wire was easily folded at the top of the buckling region. On the occasion, the constantan wire buckled towards the inside of the polymer membrane under electrical-compressive loading. The mechanisms of these instability modes were analyzed.
语种英语 ; 英语
内容类型期刊论文
源URL[http://ir.lib.tsinghua.edu.cn/ir/item.do?handle=123456789/143684]  
专题清华大学
推荐引用方式
GB/T 7714
王庆华,岸本哲,谢惠民,等. 聚合物膜上的微尺度金属导线在力电耦合作用下的屈曲行为(英文)[J],2016, 2016.
APA 王庆华.,岸本哲.,谢惠民.,李艳杰.,吴丹.,...&Dan WU.(2016).聚合物膜上的微尺度金属导线在力电耦合作用下的屈曲行为(英文)..
MLA 王庆华,et al."聚合物膜上的微尺度金属导线在力电耦合作用下的屈曲行为(英文)".(2016).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace