CORC  > 清华大学
一种基于十字镂空结构的低频超材料吸波体的设计与制备
周卓辉 ; 刘晓来 ; 黄大庆 ; 康飞宇 ; Zhou Zhuo-Hui ; Liu Xiao-Lai ; Huang Da-Qing ; Kang Fei-Yu
2016-03-30 ; 2016-03-30
关键词超材料 低频吸收 多频带吸收 磁性材料 entransy loss entropy generation Carnot cycle heat-work conversion O482.5
其他题名Design and preparation of a low frequency absorber based on hollowed-out cross-shaped meta-material structure
中文摘要设计了一种十字镂空的超材料结构,与传统的铁磁吸波材料相结合,实现了低频吸收频带的扩宽.仿真结果显示,吸波体在2-4 GHz范围可以实现-10 dB以下的吸收,相比于没有加载超材料的情况,吸收带宽扩展了0.5 GHz.实验结果在2.5-5.1 GHz范围内也显示了相似的吸收曲线,低于-9 dB的吸收频带有0.48 GHz的扩宽,扩展了23%.不同结构的能量损耗密度分布表明,相比于无镂空的十字结构,镂空十字结构可以增加磁场能量损耗,加强单元结构之间的耦合,降低超材料对传统吸波材料性能的破坏.探索了传统铁磁吸波材料厚度的变化对吸波体吸收性能的影响,发现由超材料引入的附加峰位置不随着吸波材料厚度的改变而明显地移动.根据这个结果,进一步设计了由两种超材料叠加组合而成的吸波体,仿真结果和实验结果均显示,在降低了1.1 mm铁磁吸波材料层厚度的情况下,使低频吸收带宽又扩展了0.9 GHz.; A hollowed-out cross-shaped meta-material structure is designed and fabricated in this work.A kind of conventional magnetic material which works at low frequency is used as the absorber substrate.The simulation results demonstrate that an absorber can reach an absorption of less than-10 dB in a range between 2 GHz and 4 GHz,and the absorption band is expanded by a 0.5 GHz when the meta-material structure is unloaded.The experimental results indicate that a similar absorption band appears between 2.5 GHz and 5.1 GHz,which is 0.48 GHz wider than meta-material structure and the absorption band is expanded by 23%when the depth of absorption band below-9 dB.Compared with the cross meta-material,the hollowed-out structure has ability to increase the magnetic energy loss and strengthen the coupling between the units.The influence of magnetic layer thickness on absorption capability of wave absorber is analyzed.The result indicates that the position of addition absorption band does not apparently move with variation in thickness of the magnetic material layer.Based on these results,two different meta-material structures are combined to obtain a wider absorber.The simulation result and the experimental result both show another 0.9 GHz expansion of the absorption band and it can also reduce the thickness of the magnetic layer.
语种中文 ; 中文
内容类型期刊论文
源URL[http://ir.lib.tsinghua.edu.cn/ir/item.do?handle=123456789/141737]  
专题清华大学
推荐引用方式
GB/T 7714
周卓辉,刘晓来,黄大庆,等. 一种基于十字镂空结构的低频超材料吸波体的设计与制备[J],2016, 2016.
APA 周卓辉.,刘晓来.,黄大庆.,康飞宇.,Zhou Zhuo-Hui.,...&Kang Fei-Yu.(2016).一种基于十字镂空结构的低频超材料吸波体的设计与制备..
MLA 周卓辉,et al."一种基于十字镂空结构的低频超材料吸波体的设计与制备".(2016).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace