QQ客服 官方微博 反馈留言

	高气孔率及低热导率多孔莫来石陶瓷的制备(英文)
	刘瑞平 ; 李玉涛 ; 汪长安 ; 铁生年 ; LIU Ruiping ; LI Yutao ; WANG Chang-an ; TIE Shengnian
	2016-03-30 ; 2016-03-30
关键词	多孔莫来石 气孔率 烧结 热导率 porous mullite porosity sintering thermal conductivity TQ174.1
其他题名	Fabrication of Porous Mullite Ceramics with High Porosity and Low Thermal Conductivity
中文摘要	采用叔丁醇基凝胶注模工艺制备多孔莫来石陶瓷,研究了固含量和烧结工艺对多孔莫来石陶瓷显微结构、气孔率、气孔尺寸及分布、压缩强度和室温热导率的影响。结果表明,固含量相同时,随着烧结温度的升高,多孔莫来石陶瓷的气孔率不断降低,而抗压强度则不断增加;当固含量为15%、烧结温度为1 350℃时,多孔莫来石陶瓷的气孔率最高为71.7%,平均气孔孔径为3.49μm,而热导率则低至0.103W/(m·K)。通过改变烧结温度和初始固含量可调整多孔莫来石陶瓷的微观结构和性能。; Porous mullite ceramics were prepared by tert-butyl alcohol(TBA)-based gel-casting method.Effects of solids loading and sintering temperature on the microstructure,porosity,pore size distribution,compressive strength and thermal conductivity of porous mullite ceramics were investigated.The results show that the porosity decreases and the compressive strength increases with the increases of the sintering temperature.Porous mullite ceramics with the porosity of 71.7%,the average pore size of 3.49μm and the thermal conductivity of 0.103W/(m·K)are prepared when the solid loading and sintering temperature are 15%and 1 350℃.The desigened microstructure and properties of porous mullite ceramics can be obtained viathe adjustment of the sintering temperature and initial solid loading.
语种	英语 ; 英语
内容类型	期刊论文
源URL	[http://ir.lib.tsinghua.edu.cn/ir/item.do?handle=123456789/141684]
专题	清华大学
推荐引用方式 GB/T 7714	刘瑞平,李玉涛,汪长安,等. 高气孔率及低热导率多孔莫来石陶瓷的制备(英文)[J],2016, 2016.
APA	刘瑞平.,李玉涛.,汪长安.,铁生年.,LIU Ruiping.,...&TIE Shengnian.(2016).高气孔率及低热导率多孔莫来石陶瓷的制备(英文)..
MLA	刘瑞平,et al."高气孔率及低热导率多孔莫来石陶瓷的制备(英文)".(2016).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。