Numerical simulation of die-casting mold filling process by using fractional step method | |
Jie Yang ; Yuxin Ren ; Shoumei Xiong | |
2010-10-12 ; 2010-10-12 | |
关键词 | Theoretical or Mathematical/ die casting filling flow simulation moulding Navier-Stokes equations/ die-casting mold filling process fractional step method unsteady Navier-Stokes equations water analog system fluid flow patterns/ A8120 Other methods of preparation of materials A4710 General fluid dynamics theory, simulation and other computational methods |
中文摘要 | In the numerical simulation of mold filling process, the calculation efficiency has been a key point for practical applications due to the complexity and thin-section of die castings. In current research work, a fractional step method was applied in the solution of the unsteady Navier-Stokes equations, which can be implemented with a single solution to the momentum/pressure equations at each time step. This method may avoid the decrease in efficiency induced by iteration. A water analog system was designed and developed to simulate the die casting process. The flow patterns were recorded by a high speed camera with a capturing rate of 500 frames per second. The simulation results were consistent with the experimental ones. Besides, the fluid flow patterns of several components were simulated by the fractional step and VOF algorithm, and the SOLA-VOF algorithm respectively. The simulation results showed that the combination of the fractional step method and VOF method can improve the computational efficiency to some extent in numerical simulation of mold filling process. |
语种 | 英语 |
出版者 | Trans Tech Publications Ltd. ; Switzerland |
内容类型 | 期刊论文 |
源URL | [http://hdl.handle.net/123456789/80535] |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | Jie Yang,Yuxin Ren,Shoumei Xiong. Numerical simulation of die-casting mold filling process by using fractional step method[J],2010, 2010. |
APA | Jie Yang,Yuxin Ren,&Shoumei Xiong.(2010).Numerical simulation of die-casting mold filling process by using fractional step method.. |
MLA | Jie Yang,et al."Numerical simulation of die-casting mold filling process by using fractional step method".(2010). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论