磷酸钒锂材料及全钒锂离子电池性能研究 | |
杨改 ; 应皆荣 ; 姜长印 ; 高剑 ; 万春荣 ; YANG Gai ; YING Jie-rong ; JIANG Chang-yin ; GAO Jian ; WAN Chun-rong | |
2010-07-15 ; 2010-07-15 | |
会议名称 | 第二十八届全国化学与物理电源学术年会论文集 ; 第二十八届全国化学与物理电源学术年会 ; 28~(th) Annual Meeting on Power Sources ; 中国广东广州 ; CNKI ; 中国电子学会化学与物理电源技术分会、中国电工技术学会氢能发电装置专业委员会、中国电工技术学会电池专业委员会、中国化学与物理电源行业协会 |
关键词 | Li_3V_2(PO_4)_3 全钒锂离子电池 电化学性能 Li_3V_2(PO_4)_3 all-vanadium lithium-ion battery electrochemical performance TM912 |
其他题名 | Study on Li_3V_2(PO_4)_3 and all-vanadium lithium-ion batteries |
中文摘要 | 本文采用溶胶凝胶、喷雾干燥、碳热还原法合成了球形Li_3V_2(PO_4)_3材料。与金属锂配对组成半电池时,Li_3V_2(PO_4)_3在4V和2V附近都有明显的充放电电压平台,分别对应于V~(4+/3+)和V~(3+/2+)电对。同时以Li_3V_2(PO_4)_3作为正负极材料,组装成2V级全钒锂离子电池。对该电池在1.5-3.0V范围内进行充放电测试,结果表明,该全钒锂离子电池具有优良的电化学性能。全钒锂离子电池可能成为磷酸钒锂材料应用的新领域。; Spherical Li_3V_2(PO_4)_3 powder was synthesized via melting V_2O_5 and quenching followed by spray drying and carbothermal reduction processes.Electrochemical measurements conducted in half cells with Li_3V_2 (PO_4)_3 as the cathode material and lithium metal as the anode have shown that there are obvious charge-discharge voltage plateaus at around 2.0V and 4.0V,corresponding to V~(4+/3+) and V~(3+/2+) redox couple,respectively. All-vanadium lithium-ion batteries with open circuit voltage of about 2.0V were assembled using Li_3V_2(PO_4)_3 as both cathode and anode materials.Electrochemical measurement was carried out at cut-off voltage of 1.5-3.0V. The batteries showed good electrochemical performance.Li_3V_2(PO_4)_3 electrode materials are very promising to be used in all-vanadium lithium-ion batteries.; 国家自然科学基金资助项目(50772057); 国家重点基础研究发展规划(2007CB209707) |
语种 | 中文 ; 中文 |
内容类型 | 会议论文 |
源URL | [http://hdl.handle.net/123456789/66329] |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 杨改,应皆荣,姜长印,等. 磷酸钒锂材料及全钒锂离子电池性能研究[C]. 见:第二十八届全国化学与物理电源学术年会论文集, 第二十八届全国化学与物理电源学术年会, 28~(th) Annual Meeting on Power Sources, 中国广东广州, CNKI, 中国电子学会化学与物理电源技术分会、中国电工技术学会氢能发电装置专业委员会、中国电工技术学会电池专业委员会、中国化学与物理电源行业协会. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论