QQ客服 官方微博 反馈留言

	圆形断面管道非满流流速计算表达式
	茅泽育 ; 赵璇 ; 罗昇 ; MAO Ze-yu ; ZHAO Xuan ; LUO Sheng
	2010-06-10 ; 2010-06-10
关键词	圆形断面管道 非满流 充满度 流量比 流速比 水力特性 pipeline with circular section partially filled pipe-flow degree of fullness discharge ratio velocity ratio hydraulic characteristics TU992.0
其他题名	Analytic expression for partially-filled flow velocity in pipe of circular section
中文摘要	工程实际中,常需要计算某一充满度下管道非满流的流量及流速。目前大多数计算模型均采用水力半径作为反映过流断面形状及几何尺寸的特征参数。针对不同充满度的研究结果表明,这种类型模型的计算结果与真实的流动特性并不相符,尤其当水深接近管顶时。根据水动力学基本原理及试验研究手段,对圆形断面管道无压均匀流流量-充满度非单一性进行了探索,并提出了以流量作为形状特征参数的更为合理且简单实用的水流流速计算表达式。; The pipelines with circular cross-section are widely used in the practical engineering.It is necessary to determine the flow discharge and the velocity under the partially filled condition.Most of the existing formulations use hydraulic radius as a characteristiclength parameter to reflect the influence of cross-section shape.The studies indicate that the results calculated from these types of formulations represent poorly the actual flow characteristics,especially when the flow depth reaches the top of pipe.Based upon the principle of hydrodynamics and the experimental study,the dyadic characteristics between the flow discharge and the degree of fullness for the partially filled uniform flow in circular-section pipelines are fully analyzed,and a more accurate expression using discharge as the shape parameter is developed.; 国家自然科学基金资助项目(50378049)~~
语种	中文 ; 中文
内容类型	期刊论文
源URL	[http://hdl.handle.net/123456789/59903]
专题	清华大学
推荐引用方式 GB/T 7714	茅泽育,赵璇,罗昇,等. 圆形断面管道非满流流速计算表达式[J],2010, 2010.
APA	茅泽育,赵璇,罗昇,MAO Ze-yu,ZHAO Xuan,&LUO Sheng.(2010).圆形断面管道非满流流速计算表达式..
MLA	茅泽育,et al."圆形断面管道非满流流速计算表达式".(2010).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。