基于Solaris 10的4over6机制设计 | |
黄大树 ; 崔勇 ; HUANG Da-shu ; CUI Yong | |
2010-06-09 ; 2010-06-09 | |
关键词 | 过渡 主干网 边界网关多协议扩展 隧道 Solaris10操作系统 transition,backbone,BGP-MP,Tunnel,Solaris 10 TP393.02 |
其他题名 | Design of 4over6 mechanism based on Solaris 10 |
中文摘要 | 4over6机制是由清华大学网络协议测试实验室提出来的一种用于解决现存的IPv4网络通过IPv6主干网而互通问题的机制,它主要包括两个方面的内容:控制平面和数据平面。在控制平面4over6机制扩展了BGP-MP协议,使它能够在IPv6主干网供应商边缘路由器(PErouter)之间传播4over6隧道端点信息,从而在IPv6主干网的供应商边缘路由器之间建立4over6自动隧道;数据平面主要负责对数据包进行转发以及加封装和解封装操作。Solaris10操作系统是Sun公司的开源操作系统。对于在Solaris10操作系统下面如何设计4over6机制进行了描述。; The 4over6 mechanism is a mechanism put forward by the computer network and protocol testing laboratory of Tsinghua uni-versity,the aim of this mechanism is to interconnect IPv4 networks over IPv6 backbones.In this mechanism it concerns two aspects: the control plane and the data plane.In the control plane the 4over6 mechanism extends BGP-MP to carry the tunnel end information to the other side of the IPv6 backbone to setup of a stateless 4over6 tunnel on the dual-stack provider edge(PE) router.Based on the 4over6 tunnel,the data plane focuses on the data packet forwarding process with encapsulation and decapsulation.The Solaris 10 is an open source operating system developed by Sun Microsystems.This dissertation describes the design methods of 4over6 mechanism in Solaris 10 operating system.; 国家973重点基础研究发展计划基金项目(2003CB314801) |
语种 | 中文 ; 中文 |
内容类型 | 期刊论文 |
源URL | [http://hdl.handle.net/123456789/55659] |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 黄大树,崔勇,HUANG Da-shu,等. 基于Solaris 10的4over6机制设计[J],2010, 2010. |
APA | 黄大树,崔勇,HUANG Da-shu,&CUI Yong.(2010).基于Solaris 10的4over6机制设计.. |
MLA | 黄大树,et al."基于Solaris 10的4over6机制设计".(2010). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论