CORC  > 清华大学
重复频率脉冲激光纵模测量方法研究
黄金星 ; 霍玉晶 ; 何淑芳 ; HUANG Jin-xing ; HUO Yu-jing ; HE Shu-fang
2010-05-12 ; 2010-05-12
关键词脉冲激光 纵模结构 扫描干涉仪 示波器成像 pulsed laser longitudinal mode sweeping interferometer oscilloscope imaging TN24
其他题名Study on Measuring the Longitudinal Mode of Rep-rate Pulsed Laser
中文摘要提出了一种利用共焦球面扫描干涉仪对重复频率脉冲激光纵模结构进行测量的实验方法。该方法不仅能检测激光器是在单纵模还是多纵模下工作、计算待测激光的纵模间隔和谱线宽度,还能直接观测到各纵模的相对能量分布,测量精度高,结果直观,设备简单。实现了对1kHz以上重复频率脉冲激光纵模结构的测量,示波器上波形清晰稳定。利用该方法测量脉冲激光纵模结构在国内外文献中未见报道。; A measuring method of the longitudinal mode of rep-rate pulsed laser based on confocal spherical sweeping interferometer is demonstrated.This method can not only examine whether the laser is single longitudinal mode or multiple longitudinal mode,and calculate the distance of longitudinal mode and the width of spectrum,but also tell the energy distribution of each mode.It is highly precise,intuitionistic and convenience.The measuring of longitudinal mode of pulsed laser with over 1kHz rep-rate is achieved.The picture on the oscilloscope is clear and steady.There is no similar paper seen in domestic or overseas literature.
语种中文 ; 中文
内容类型期刊论文
源URL[http://hdl.handle.net/123456789/28035]  
专题清华大学
推荐引用方式
GB/T 7714
黄金星,霍玉晶,何淑芳,等. 重复频率脉冲激光纵模测量方法研究[J],2010, 2010.
APA 黄金星,霍玉晶,何淑芳,HUANG Jin-xing,HUO Yu-jing,&HE Shu-fang.(2010).重复频率脉冲激光纵模测量方法研究..
MLA 黄金星,et al."重复频率脉冲激光纵模测量方法研究".(2010).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace