QQ客服 官方微博 反馈留言

	Fabrication of optical elements using a rapid UV-curable and low-viscosity polymer material
	Zhang, Man1; Li, Zhiwei1; Dong, Xiaochun1; Shi, Lifang1; Deng, Qiling1; Du, Chunlei2
	2013
会议名称	Proceedings of SPIE: Eighth International Symposium on Precision Engineering Measurements and Instrumentation
会议日期	2013
卷号	8759
页码	875926
通讯作者	Li, Z. (lzw@ioe.ac.cn)
中文摘要	Polymer optical elements have widely been investigated because of their low cost and simple fabrication. Currently, UV-curable epoxy resins have been become general polymer materials for optical elements. However, they are still limited by their intrinsic properties, such as a relatively low rate of polymerization and high formulation viscosity. This paper proposed and demonstrated a rapid UV-curable process for polymer optical elements fabrication based on a UV-curable and low-viscosity thiol-ene composition. Several optical elements, including one-dimensional gratings with a 10-um period, Dammann Gratings and microlens arrays (100μm lens diameter), were fabricated by the UV-curable thiol-ene composition and their optical properties were examined in detail. © 2013 SPIE.
英文摘要	Polymer optical elements have widely been investigated because of their low cost and simple fabrication. Currently, UV-curable epoxy resins have been become general polymer materials for optical elements. However, they are still limited by their intrinsic properties, such as a relatively low rate of polymerization and high formulation viscosity. This paper proposed and demonstrated a rapid UV-curable process for polymer optical elements fabrication based on a UV-curable and low-viscosity thiol-ene composition. Several optical elements, including one-dimensional gratings with a 10-um period, Dammann Gratings and microlens arrays (100μm lens diameter), were fabricated by the UV-curable thiol-ene composition and their optical properties were examined in detail. © 2013 SPIE.
收录类别	EI
学科主题	Curing - Epoxy resins - Fabrication - Measurements - Microoptics - Optical properties - Precision engineering - Viscosity
语种	英语
ISSN号	0277786X
内容类型	会议论文
源URL	[http://ir.ioe.ac.cn/handle/181551/7659]
专题	光电技术研究所_微电子装备总体研究室（四室）
作者单位	1.State Key Laboratory of Optical Technologies for Microfabrication, Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu 610209, China 2.Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, Chongqing 401122, China
推荐引用方式 GB/T 7714	Zhang, Man,Li, Zhiwei,Dong, Xiaochun,et al. Fabrication of optical elements using a rapid UV-curable and low-viscosity polymer material[C]. 见:Proceedings of SPIE: Eighth International Symposium on Precision Engineering Measurements and Instrumentation. 2013.

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。